NQPSMTR
Supplemental Notes
© 1997 Roland Corporation U.S.
Re-initialization Procedures
Page 4 of 9
JUNO-2
(Same as ALPHA JUNO-2.) No ROM reset.
JUNO-6
No ROM reset.
JUNO-60
No ROM reset.
JUNO-106
No ROM reset.
JUPITER-6
(Same as JP-6.) No ROM reset.
JUPITER-8
(Same as JP-8.) No ROM reset.
JV-30
Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^) .
JV-35
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN
(v) to select ALL. Press VALUE UP (^).
JV-50
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN
(v) to select ALL. Press VALUE UP (^).
JV-80
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press
ENTER and then press WRITE.
JV-90
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press
ENTER and then press WRITE.
JV-880
Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press ENTER
twice.
JV-1000
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press
ENTER, then press WRITE.
JV-1080
Press UTILITY. Cursor down once, then cursor right three times to select FACTORY
PRESET. Press ENTER twice, then press UTILITY.
JV-2080
Press UTILITY. Press F6 twice to select MENU 3. Press F1. Then press F6. If
necessary, use the VALUE DIAL to turn Memory Protect OFF and press F6 twice.
JW-50
Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS
RESET), then F4 (YES).
JX-1
Power on while holding WRITE and FLUTE.
JX-3P
No ROM reset.
JX-8P
No ROM reset.
JX-10
(Same as SUPER JX keyboard.) No ROM reset.
KR-33
The unit resets each time you turn it on.
KR-55
Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds.
KR-100
The unit resets each time you turn it on.
KR-350
While holding LOAD and SAVE, press WRITE.
KR-370
The unit resets each time you turn it on.
KR-500
While holding FROM and TO, press WRITE.
KR-570
While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer
section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY
SETUP LOAD in the window. After loading is complete, power off and then back on.
KR-650
While holding LOAD and SAVE, press WRITE.
KR-770
While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer
section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY
SETUP LOAD in the window. After loading is complete, power off and then back on.
Содержание GP-100
Страница 1: ...BOOK ...
Страница 2: ......