page | 2
ROLAND FR-8x
How to use Expansion Sound
FR-8x
How to install the Sets
※
This step is unnecessary for expansion sounds that do not contain [.ST8] files.
1.
Insert your USB memory in your FR-8x.
2.
Press the [MENU/WRITE] button.
3.
Select "Utility using" the [DATA/ENTER] knob.
4.
Select "IMPORT" 15.9 using the [DATA/ENTER] knob.
5.
Press [DATA/ENTER] knob again to highlight the "Type" parameter.
6.
Select "SET" using the [DATA/ENTER] knob.
7.
Press [DATA/ENTER] knob to confirm.
8.
Select "SET File" using the [DATA/ENTER] knob.
9.
Press [DATA/ENTER] knob again to highlight the "SET File" parameter.
10.
Select "Single" using the [DATA/ENTER] knob.
11.
Press [DATA/ENTER] knob to confirm.
12.
Select "Dest. SET" using the [DATA/ENTER] knob.
13.
Press [DATA/ENTER] knob again to highlight the "Dest. SET" parameter.
14.
Select the SET destination where you want to import the SET using the [DATA/ENTER] knob.
15.
Press [DATA/ENTER] knob to confirm.
16.
Press the [MENU/WRITE] button to proceed. The display shows the contents of the USB memory.
17.
Use the [DATA/ENTER] buttons to select a file (.ST8) that you want to import.
18.
Press the [MENU/WRITE] button to import.
Please wait until the "Operation complete" message appears.
Press the [EXIT] button several times to return to the previous screen.
■
Copyright
Copyright to this data and the accompanying documentation is the property of Roland Corporation.
■
Disclaimers
・
This sound data is provided as after-sales service for the FR-8x/FR-8xb.
・
Roland Corporation accepts no responsibility for any damages that may arise from the use of this data.
Date: August, 25, 2017
