Roland FP-50, Руководство пользователя

Страница: 49 / 64

Error Messages
Display Meaning
Error 1 The music file you attempted to save is read-only. It cannot be saved.
Error 2
An error occurred while writing. It may be that the protect tab of the external media is in the “Protect (write prohibit)” position, or that the
external media has not been formatted.
Error 10
No USB flash drive connected. Connect a USB flash drive and try the operation again.
Error 11
There is insufficient free space at the save destination. Either connect a different USB flash drive, or delete unwanted data (song data, registration
sets) and try the operation again.
Error 14
An error occurred while reading. The USB flash drive may be damaged. Connect a different USB flash drive and try the operation again. You may
also format the USB flash drive (p. 36).
Error 15 The file could not be read. The data format is not compatible with the FP-50.
Error 16
The data could not be read fast enough during song playback. After waiting several seconds, you may be able to play back the song by pressing
the [ ] button once again.
Error 18 This audio format is not supported. Please use WAV format, 44.1 kHz, 16-bit linear audio files.
Error 30 The FP-50’s internal memory is full.
Error 40
The FP-50 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of data being transmitted by the
external MIDI device.
Error 41 A MIDI cable was disconnected. Connect the MIDI cable correctly.
Error 43 An error occurred during MIDI communication. Check the MIDI cable and the connected MIDI device.
Error 46 The access point is not supported. Please use WPA or WPA2 authentication.
Error 51
The system may have malfunctioned. Try the operation again. If this indication still appears after trying the operation several times, contact
Roland Service Center.
Error 65
The USB MEMORY port was subjected to excessive current. Verify that there is no malfunction in the USB flash drive, and then turn the power off,
then on again (p. 13).
Saved Settings
Settings Saved in Registrations
Setting Explanation Page
–
Selected tone p. 14
– Dual play on/off p. 14
– Tone 1/Tone 2 (Dual play) p. 14
–
Split play on/off p. 15
–
Right-hand tone/Left-hand tone (Split
play)
p. 15
– Split point p. 15
–
Transpose’s on or off, its value, and
Transpose mode
p. 18
– Ambience on/off and depth p. 17
–
The Volume Balance between Your
Keyboard Performance and the
Accompaniment
p. 8
– Rotary effect’s pulse speed p. 14
Modulation Speed Speed of sound modulation p. 14
KeyTouch Key touch p. 18
Rhythm
Rhythm settings p. 19
Dual Bal Dual balance p. 38
SplitBal Split Balance p. 38
Ambience Ambience on/off and depth p. 17
AudTrans Audio transpose p. 23
Trnspose Transpose mode p. 38
Oct Shft Octave shift p. 38
SplOnRcg
Recognize split on chord recognize p. 39
DPdl Prt Setting for the damper pedal part p. 39
CPdl Prt Setting for the center pedal part p. 39
CPdl Fnc
Function of the center pedal p. 39
LPdl Prt Setting for the left pedal p. 40
LPdl Fnc Function of the left pedal p. 40
MIDI Ch MIDI transmit channel p. 41
RgstTxCh
Program change data p. 40
Rgst .PC
Rgst .MSB
Rgst .LSB
Items Stored by Memory Backup
Setting Explanation Page
Tuning
Master tuning p. 37
Temprmnt
Temperament p. 37
Tmpr Key
Temperament key p. 37
Equalizr
Equalizer on/off and equalizer settings p. 17
Stretch
Stretch tuning p. 38
Dmpr Res
Damper resonance p. 38
Strg Res String resonance p. 38
KOff Res Key off resonance p. 38
Cabinet Cabinet resonance p. 38
Sound Brd Soundboard behavior p. 38
VC Ch Visual Control channel p. 42
Settings Stored Immediately When Edited
Setting Explanation Page
USB Mode USB flash drive settings p. 42
Auto Off Auto off p. 33
Wireless Wireless LAN settings p. 43
49 49
O
per
ation G
uide
G
etting R
eady
Per
forming
Rec
or
ding
Reg
istr
ations
Settings
Appendix