manualshive.com logo in svg

Roland Fantom-Xa, Руководство пользователя

Поделиться
Скачать
Roland Fantom-Xa Скачать руководство пользователя страница 108

 

108

Editing a Sample

 

This operation cuts the portions of the sample that are earlier than 
the Start Point and later than the Loop End Point.

 

*

You cannot execute this with more than one sample selected.

 

1.

 

Press [SAMPLE EDIT <-> LIST] to access the SAMPLE EDIT 

screen.

 

2.

 

Specify the Start/End points of the sample (p. 106).

 

3.

 

Press [F3 (MODIFY)] to open the Sample Modify Menu 

window.

 

4.

 

Press [F1 (TRUNC&EMPHS)], and then press [F1 (TRUNC)].

 

fig.TRUNCATE

 

5.

 

If you want to replace the current sample with the truncated 

sample, press [F4 (OVER WRITE)] to display the “

 

✔

 

” mark.

 

6.

 

Press [F6 (EXEC)].

 

A message will ask you for confirmation.

 

7.

 

To execute, press [F6 (EXEC)].

 

*

To cancel, press [F5 (CANCEL)].

 

In some cases, the audio quality will be improved if you boost the 
high-frequency range of an imported sample. Also, the high-
frequency range of the sample may be emphasized when you use a 
sampler made by another manufacturer. In this case, you can 
minimize the change in tonal character by attenuating the high-
frequency range.

 

*

You cannot execute this with more than one sample selected.

 

1.

 

Press [SAMPLE EDIT <-> LIST] to access the SAMPLE EDIT 

screen.

 

2.

 

Press [F3 (MODIFY)] to open the Sample Modify Menu 

window.

 

3.

 

Press [F1 (TRUNC&EMPHS)], and then press [F2 (EMPHS)].

 

fig.EMPHASIS

 

4.

 

Use the VALUE dial or [INC] [DEC] to select the emphasis 

type.

PreEmphasis:

 

 Emphasizes the high-frequency range.

 

DeEmphasis:

 

 Attenuates the high-frequency range.

 

5.

 

If you want to replace the current sample with the 

emphasized sample, press [F4 (OVER WRITE)] to display 
the “

 

✔

 

” mark.

 

6.

 

Press [F6 (EXEC)].

 

A message will ask you for confirmation.

 

7.

 

To execute, press [F6 (EXEC)].

 

*

To cancel, press [F5 (CANCEL)].

 

Removing Unwanted Portions of a 
Sample (TRUNCATE)

 

Boosting or Limiting the High-
frequency Range of the Sample 
(EMPHASIS)

Fantom-Xa_e.book 108 ページ ２００４年１０月２２日　金曜日　午後２時３分

Содержание Fantom-Xa









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды