6
The EV-1-WL remembers the information
for the last Bluetooth device to which
it was connected. When connecting to
a different device after connecting to
the GS-1, or when turning off the power
while the Bluetooth indicator is blinking
white (not connected), or when doing
a factory reset of the EV-1-WL, the unit
does not pair automatically. In this case,
you must start from step 1 to configure
the settings.
* The
GS-1
and
EV-1-WL
are connected
automatically next time they are restarted. To
connect the GS-1 Editor you must perform steps
5 and 6 each time.
* If the devices do not pair after one minute has
passed, pairing mode is automatically canceled.
