Roland E-A7 Скачать руководство пользователя страница 19

Страница: 19 / 70

User Program Edit Parameters

Play Tones

You can play a specific note number (keyboard location) of a tone.

This is a convenient way to play sound effects or drum sounds.

Playing the Pads

Press any one of the Pad

[1]

–

[6]

buttons.

A sound or phrase is heard according to the settings of Pad Setting 1.

“Editing the Pad Settings”

(p. 19)

MEMO

You can play up to six pads simultaneously.

Stopping the Pad Sound

Press the Pad

[Stop]

button to stop all sound.

If multiple pads are sounding, pressing one of the sounding pad

buttons stops the sound of only that pad button.
If you press a pad button while a tone is sounding, the tone begins

sounding again.

Pad Settings

Viewing the Pad Settings

With the

[Scale Tune/Pad]

button unlit, press the View

button.

The Pad Assign View screen appears.
In this screen you can view the phrases or tones that are assigned to

each pad.

Editing the Pad Settings

With the

[Scale Tune/Pad]

button unlit, press

[Setting]

button.

The Pad Setting screen for the selected pad appears.
If you want to switch the Pad number, select

“Pad number”

with

direct button, then use the Value

[-]

[+]

buttons.

MEMO

You can also access this via

[Menu]

“User Program Edit”

“Pad Setting ”

You can also access from

“Pad Assign View”

screen.

Use the direct buttons to select Pad Type.

Use the Value

[-]

[+]

buttons to edit the Pad Type.

Pad Type

Explanation

Off

No assign

Phrase

A phrase is assigned to Pad

Tone

A tone is assigned to Pad

MEMO

The setting items differ depending on the Pad Type.

If you specify Off, pressing that pad does not produce sound.

Use the direct buttons to make other settings.

The following items are available for each Pad Type.

Phrase

Parameter

Value

Explanation

Phrase

Phrase Name

Select a Phrase.

Volume

0–127

Volume of the phrase.

Reverb Send

0–127

Adjusts the reverb send amount.

Chorus Send

0–127

Adjusts the chorus send amount.

Parameter

Value

Explanation

MFX

Off, Mfx, A, B

Select the routing to Effect

Mfx:

Effect used on Keyboard Parts

A or B:

Effect used on Accomp Parts

Loop

Off, On

If this is On, the phrase continues playing

repeatedly.

Sync Switch

Off, On

If this is On, the phrase starts at the begin-

ning of measure divisions in the Arranger

or SMF.

Sync Start

Off, On

If this parameter set ON, Style and SMF

playback start then also begins to ring

Phrase at the same time.
While Style and SMF stop, Pads what this

param set ON is blinking.

Selecting a Phrase

If you select the Phrase parameter, the Phrase List screen appears.
Use the direct buttons to select a phrase.

MEMO

You can switch Sync Start setting On/Off, when you hold down

the Pad

[Sync Start]

button and press the Pad

[1]

–

[6]

button.

* Valid only when the Pad Type is set to Phrase.

Tone

Parameter

Value

Explanation

Tone

Tone Num,

Name

Tone number, name

Note

0 (C-)–127 (G9) Note number

Velocity

1–127

Velocity

Volume

0–127

Tone volume

Reverb Send

0–127

Adjusts the reverb send amount.

Chorus Send

0–127

Adjusts the chorus send amount.

MFX

Off, Mfx, A, B

Select the routing to Effect

Mfx:

Effect used on Keyboard Parts

A or B:

Effect used on Acomp Parts

Hold

On, Off

Holds the sound.

MEMO

A sample that is set to Loop On can be played

continuously (Loop setting: p. 19). A short audio

phrase or a drum pattern can be imported as a

sample, and then assigned to a tone so that you

can play it from the pads.

MEMO

In the case of a tone, you can’t specify Loop or Sync.

Selecting a Tone

If the Pad Type is set to Tone, the Tone List screen appears in the right

display.
Use the direct buttons of the right display to select a Tone.
You can also select a user tone or user drum kit.
However you might not hear any sound if the sample has been

deleted or if the user tone number has changed.

When you have finished making settings, press the

[Exit]

button several times to return to the previous

screen.

Saving the Pad Settings

Pad settings are saved in a user program or in a One Touch memory.

“Saving Settings as a User Program”

(Owner’s Manual: p. 46)

“Creating Your Own One Touch Memories (One Touch

Settings)”

(Owner’s Manual: p. 26)

Normally, when the Write operation is executed, it will be saved as a

User Program parameters.

NOTE

If one of the One Touch settings is selected (one of the One Touch

[1]

–

[4]

buttons lit), writing a user program will save the One

Touch settings to the user program (the Pad settings are also

included).

Содержание E-A7






































































Результаты поиска

Содержание E-A7

Отзывы:

Похожие инструкции для E-A7

Бренды по названию

Популярные бренды

Roland E-A7, Справочное руководство

Результаты поиска

Содержание E-A7

Отзывы:

Похожие инструкции для E-A7

Бренды по названию

Популярные бренды