4-2 Preparation for and Performing Cutting
Chapter 4 Performing Cutting
Chapter 4 Performing Cutting
74
Mounting the Workpiece
Procedure
Close the front covers and press the VIEW button.
P. 57, Moving to the VIEW Position
Remove the cover of the dust collection capsule if it is attached.
Mount the workpiece on the main-clamp.
The sub clamp (s) varies according to the type of the workpiece. Mount according to the order shown in
the figure and tighten the cap at the end.
In the case of a Disc workpiece
Cap
workpiece
Main-clamp
Without levels
With levels