2
Making the Settings
Check the Included Items
After opening the package, check that all of the included items are
present. If anything is missing, contact your dealer.
CY-18DR
Wing nut
Felt washer
Stopper
Connection cable
Cable tie
Owner’s manual (this document)
CY-18DR Components
Bell
Bow
Edge
FUNC button (*1)
DIGITAL TRIGGER OUT connector
(*1)
This button will be used in the event of a future upgrade.
* It is not normally used.
Mounting on the Stand
1.
Use a commercially available drum key to tighten the
stopper bolt.
The stopper keeps the V-Cymbal from turning, preventing the
tangling of cables on the stand.
Stopper
Attach the stopper
so that the bolt is on
the right-hand side,
from the performer’s
perspective.
Bolt
Tighten the bolt
with a commercially
available drum key.
2.
Attach the V-Cymbal, while positioning it so the Roland
logo is located on the side opposite the performer.
Wing nut
Felt washer
Position the
Roland logo
on the opposite side of the
playing area
3.
Tighten the included felt washer and the wing nut to
obtain the desired movement.
* Use the included felt washer and wing nut.
* Double sounding may occur if the wing nut is loose.
4.
Insert the plug of the connection cable into the CY-18DR’s
DIGITAL TRIGGER OUT connector.
Connection cable
Protector
Use the protector to lock the
connection.
5.
Secure the cables in place with the cable tie.
Leave some slack in the cables to ensure they are not pulled by the
movement of the V-Cymbal pads.
Be sure to make this
small plastic hook
visible from you.
Wind a cable tie around a cable.
Wind a cable tie around the pipe and
tighten it in order to not to slip.
Insert the small
plastic hook to a
hole to secure the
cable to the cymbal arm.
Secure the cable in place
with the cable tie
Leave some slack in the cable
* Take care to ensure that the cables do not touch the V-Cymbal
pads and/ or the stand. A cable touching a V-Cymbal pad or a
stand may cause double sounding or other incorrect operation.
