6
such as double sounding.
3.
Make the trigger settings for the percussion
sound module. For the recommended values,
refer to p. 2.
Should you neglect to make the appropriate settings for the
percussion sound module.
• Sometimes it does not sound (uneven volume)
• The volume is too low (reduced sensitivity)
• Double sounding may occur
For information on how to change the parameters for a
percussion sound module, refer to its owner’s manual.
If Using TD-10 + TDW-1
with V-Cymbal Control
When you use the TD-10 + TDW-1 V-Cymbal Control, three
way triggering is possible.
* Three Way Triggering is not available with the TD-8.
About Three Way Triggering
By using two cables to connect the CY-12R/C and a TD-10, you
can then perform using three different tones: bow, bell, and edge.
TDW-1 specifications allow the Three Way Triggering
function to be used with only one V-Cymbal. For example, if
you use the Three Way Triggering function with one CY-15R,
you would not be able to use Three Way Triggering if you
added another CY-12R/C.
Connections/Examples of Settings
If you connect a pad or a V-Cymbal ONLY to the trigger input
for which trigger type is set to the “CTR”(11/AUX 1), it will
not work.
Correspondences Between Playing
Methods and Trigger Input
* Head-side tones for the trigger input 11/AUX 1 cannot be sounded.
For more details on the settings for Three Way Triggering,
refer to the TDW-1 with V-Cymbal Control Owner's Manual.
The TDW-1 with V-Cymbal Control Owner's Manual contains
an explanation of how the CY-15R is used with Three Way
Triggering. Substitute “CY-12R/C” for “CY-15R” as you read
through the text.
Playing Methods
Bow Shot
This is the most common playing method, playing the pad face
of the cymbal. It corresponds to the sound of the “head-side” of
the connected trigger input.
Edge Shot
This playing method involves striking the edge with the
shoulder of the stick. It corresponds to the sound of the “rim-
side” of the connected trigger input.
To make use of edge shot, you'll need to connect to a trigger
input jack on the percussion sound module that
accommodates rim shots.
Bell Shot
This playing method involves striking the bell. It corresponds
to the sound of the “rim-side” of the connected trigger input.
• To make use of bell shot, you'll need to connect to a
trigger input jack on the percussion sound module that
accommodates rim shots.
• Use the shoulder of the stick when playing bell shots.
CY-12R/C
Output
TD-10 Trigger
Input
TD-10 Trigger
Type
BOW/BELL
10/RIDE
RdA
BOW/EDGE
11/AUX1
CTR
Playing Methods
TD-10 Trigger Input
Bow Shot
10/RIDE Head
Bell Shot
10/RIDE Rim
Edge Shot
11/AUX 1 Rim
Bow
Edge sensor
Bell
Next
