background image

21

Playing <Basic Operation>

Turn the [Tone] knob to adjust the bright-
ness of the sound.

• Turning the knob clockwise will make the 

sound brighter.

• Turning the knob counterclockwise will make 

the sound rounder.

The C-200 provides five separate sound divisions: Organ and orchestra (PEDAL, MANUAL I, MANUAL II), Harpsichord, 
Fortepiano, Piano and Celesta. Only one of the following sections can be used at any one time: Organ or Harpsichord or 
Fortepiano or Piano or Celesta. 

The C-200 comes with 28 organ and 8 orches-
tral voices that can be selected using the 7 tilt 
tabs (PRINCIPAL~USER ORCH). There are 4 
organ voices per tilt tab, one of which can be 
assigned at a time (see p. 32). The USER 
ORCH tilt tab not only allows you to select 
one of 4 organ voices, but also one of 8 orchestral sounds.

1.

Press the lower part of the tilt tabs you wish to use.

The tilt tabs you activate light. You can activate several sounds at once if you like. 

2.

To switch off the selected organ sounds, press the upper part of all tilt tabs that are lit.

The tilt tabs go dark.

See also “Additional functions for the Classic Organ sounds” on p. 29.

Adjusting the timbre (brightness)

Choosing a sound

Playing the MANUAL I division

C-200_e.book  Page 21  Monday, April 4, 2011  5:22 PM

Содержание Classic C-200





















































Отзывы: