5
IMPORTANT NOTES
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE
UNIT SAFELY” on pages 2 and 3, please read and observe the following:
Power Supply
301
• Do not use this unit on the same power circuit
with any device that will generate line noise
(such as an electric motor or variable lighting
system).
307
• Before connecting this unit to other devices,
turn off the power to all units. This will help
prevent malfunctions and/or damage to
speakers or other devices.
Placement
352
• This device may interfere with radio and
television reception. Do not use this device in
the vicinity of such receivers.
353
• Observe the following when using this
device. For further details, refer to “Handling
the CD-RW Drive” on this page.
• Do not place the unit near devices that
produce a strong magnetic field (e.g.,
loudspeakers).
• Install the unit on a solid, level surface.
• Do not move the unit or subject it to
vibration while the drive is operating.
354a
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave it
inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
355
• To avoid possible breakdown, do not use the
unit in a wet area, such as an area exposed to
rain or other moisture.
Maintenance
401a
• For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
402
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Handling the CD-RW Drive
602
• Install the unit on a solid, level surface in an
area free from vibration.
603
• Avoid using the unit immediately after it has
been moved to a location with a level of
humidity that is greatly different than its former
location. Rapid changes in the environment can
cause condensation to form inside the drive,
which will adversely affect the operation of the
drive and/or damage discs. When the unit has
been moved, allow it to become accustomed to
the new environment (allow a few hours) before
operating it.
606
• Remove any disk from the drive before
powering up or down.
608
• To avoid the risk of malfunction and/or
damage, insert only discs with
into
the CD-RW drive. Never insert any other type
of disc. Avoid getting paper clips, coins, or
any other foreign objects inside the drive.
***
• When you carry CDR-88RW-4, remove the
disc from the loading tray. Do not carry the
device with the loading tray downward.
***
• Avoid vibration and shock during operating.
Do not carry with the power on.
***
• Optical pickup is dust-proof. Using a CD type
pickup cleaner may damage.
