Roland BRIDGE CAST, Руководство пользователя

Страница: 50 / 74

Operating Panel Settings (on the BRIDGE CAST)
50
Operating Panel Settings (on the BRIDGE CAST)
This section explains about the settings for the operating panel of this unit.
â Configuring How the Operating Panel Works(P.50)
â
Registering a Sound Effect(P.52)
Configuring How the Operating Panel Works
Here’s how to select the input source controlled by the CH [1]–[4] knobs on the BRIDGE CAST, and the functions that are executed
by the MUTE/ASSIGN [1]–[4] buttons.
You can also change the color of the CH 1–4 indicators.
1. On the menu screen, click the “CHANNEL” tab, select a channel using the “CH.1”–”CH.4” tabs, and set
the parameters in the respective menus.
Menu Value Explanation
SOURCE
This selects the input source that’s assigned to each channel.
Use the CH [1]–[4] knobs on the BRIDGE CAST to change the volume of the assigned input source.
MIC
The audio of the dynamic mic, condenser mic connected to the MIC jack, or the audio
of the headset mic connected to the PHONES/HEADSET jack
*
When this is set to “MIC”, you must select the mic type.
â
Selecting the type of mic to use (P.28)
AUX Audio input from the AUX jack
CHAT (*1)
GAME (*1)
MUSIC (*1)
SYSTEM (*1)
USB (*2)
Audio input from the USB port
SFX Sound effects (SFX A, SFX B, SFX BEEP)
LED COLOR – Sets the color of the CH1–4 indicators.
MUTE/ASSIGN
This sets the functions for the MUTE/ASSIGN [1]–[4] buttons.
CH MUTE ALL (*3)
Mutes/unmutes audio for the channels routed to the STREAM MIX bus and PERSONAL
MIX bus.
Mutes/unmutes the mic audio (not routed through a bus) and the mic audio routed to
the the STREAM MIX bus/PERSONAL MIX bus, when the input source is “MIC”.