Roland Boutique JX-03, Руководство пользователя

Страница: 26 / 35

26
IV. Effects
Chorus
The chorus effect of the JX-03 is intended as an accurate replica of the classic chorus effect found on the Roland
JX-3P. Because of the ACB replica of the Roland R3109 chip the actual components of these effects and circuits are
remarkably well reproduced here.
To activate the chorus effect:
1. Press Chorus button.
To deactivate the chorus effect:
1. Press Chorus button again
Undocumented Chorus
There is an undocumented CHORUS effect which has received a lot of attention on the Roland Boutique JP-08. This
effect also works with the JX-03 (and I presume the JU-06 as well.)
With an eternal MIDI controller, send CC#93 and choose from 0-3
[0] OFF
[1] Chorus 1
[2] Chorus 2
[3] Chorus 3
There is not method of accessing these choices from the JX-03 itself, you must use an external Midi Control Surface,
Keyboard which can send CC data, or your hardware sequencer, or DAW.
NOTE - The CHORUS button will still switch off and on the chorus effect when using alternate forms of the chorus via
MIDI, however, when switched back on, only the default chorus effect is available from the synthesizer. MIDI
commands are required in order to access these extra iterations of the chorus effect.