Roland BOSS KATANA-50 Mk II, Заметки по обслуживанию, Страница: 25 / 41

25
Oct. 2019 KTN-50_2
6. Jack Sense & Foot Switch Check
VARIATION flashes.
Operate each jack in the number sequence shown in the table below, and verify the status of the LEDs.
R: lights in red, G: lights in green, R*: flashes in red, G*: flashes in green -: goes off
7. USB Check
BOOSTER
flashes.
1.
Connect the computer to the
USB
connector.
BOOSTER lights up.
2.
Disconnect the USB cable.
Execution automatically advances to the next test item.
8 . Device Check
When the unit enters the Test Mode, the Device Check runs automatically in the background and the results are shown when entering this test item.
If they are OK , BOOSTER – REVERB flash in green, and the unit automatically advances to the next test item.
If the result is
not OK
, the buttons corresponding to the devices which have troubles flash as follows.
R*: flashes in red, G*: flashes in green, -: goes off
Operation Procedure Button (LED)
Jack Procedure
VARIA-
TION
BOOS
TER
MOD FX DELAY REVERB CH1 CH2 PANEL
0 Initial State R* - - - - - - - -
1 INPUT Insert a dummy plug R R* - - - - - - -
2 POWER AMP IN Insert a dummy plug R R R R R R* - - -
3
PHONES/REC
OUT
Insert a dummy plug R R R R R R R* - -
4 FOOT CONTROL
Connect FS-5U (x 2) or FS-6
(x 1)
R R R R R R R R R*
5
AUX
Insert miniature stereo
phone plug
R R R R R R R R R
6
Disconnect miniature ste-
reo phone plug
R G* R R R R R R -
7
FOOT CONTROL
Press the Ring side pedal R G R R R R R R -
8 Release the Ring side pedal R R G* R R R R R -
9 Press the Tip side pedal R R G R R R R R -
10 Release the Tip side pedal R R R R R R R R -
11 Disconnect the plug R R R R R R - - -
12
PHONES/REC
OUT
Disconnect the plug R R - - - - - - -
13 POWER AMP IN Disconnect the plug R - - - - - - - -
14 INPUT Disconnect the plug
- - - - - - - - -
Execution automatically advances to the next test item.
Not-OK Device
Button (LED)
BOOSTER MOD FX DELAY REVERB TAP
SFlash R* - - - - -
SDRAM (CPU) - R* - - - -
DSP - - R* - - -
SDRAM (DSP ERAM) - - - R* - -
Program Sum - - - - R* -
Sensor - - - - - R*
If all are OK G* (and advances to the next test item) -