®ÂØÒňÎ
®
GT-6
Guitar Effects
Processor
TurboStart
TBS148
© 2001 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040
Faxback # 20181
Page 2
6.
Turn the PATCH/VALUE dial to select the
desired effect. Choose the TREMELO effect as
an example.
7.
Press the PARAMETER buttons to select each
effect parameter, and turn the PATCH/VALUE
dial to select the desired value. Try editing the
Rate and Depth parameters.
8.
Now try doing the same thing with FX-2, DELAY,
and the OVERDRIVE/DISTORTION effects.
9.
To save your settings, press the WRITE button
two times.
EZ Tone
In addition to patches, the GT-6 also features internal
template settings that are very useful when creating
new, original patches. Use the following procedure to
use the EZ Tone patch templates:
1.
Press EZ TONE.
2.
Turn the VALUE dial to select the desired
template. Let’s try EZ CRUNCH 1.
3.
Press the ON/OFF button under CHORUS to
turn this effect on and off.
4.
Turn the knob to adjust the Chorus Level.
5.
Press EZ TONE again to compare the settings in
use before entering EZ Tone mode with the
edited settings.
6.
Press the ON/OFF buttons for other effects to
experiment with different settings
7.
Press EXIT to return to the Play screen.
Manual Mode
Manual Mode turns the 1-4 pedals and the BANK
pedals into on/off switches for selected effects. Use
the following procedure to enter Manual Mode:
1.
Select Patch 15-4 (ETHEREAL).
2.
Press MANUAL.
3.
Press the PARAMETER RIGHT button once to
display which effects are controlled by which
pedal.
4.
Press the pedals to turn the displayed effects on
and off.
5.
Use the PARAMETER buttons to select a pedal
location and the PATCH/VALUE dial to change
which effect is controlled by which pedal.
6.
Press EXIT to return to the Play screen.
