Roland BA-330, Руководство пользователя

Страница: 17 / 25

15
Convenient Features
P
o
rt
u
g
u
ê
s
It
a
li
a
n
o
D
e
u
ts
ch
N
e
d
e
rl
a
n
d
s
E
sp
a
ñ
o
l
F
ra
n
ça
is
E
n
g
li
sh
Connections that allow the input jacks of
both units to be used
This arrangement lets you play in stereo, making maximum use of
the two BA-330s’ mixer functions (with 12 inputs).
CH 1 −
R
CH 1 −
AUX IN
AUX IN
L
Connect the devices to the BA-330 (L) and BA-330 (R).
Connect the STEREO LINK OUT R jack on the BA-330 (L)
and the STEREO LINK IN jack on the BA-330 (R).
Connect the STEREO LINK OUT L jack on the BA-330 (R)
and the STEREO LINK IN jack on the BA-330 (L).
Turn on both BA-330 (L) and BA-330 (R).
Adjust the volume levels on all devices.
Adjust the BA-330 (L) and BA-330 (R) volume levels sepa-
rately using their [VOLUME] knobs.
Adjusting the volume and tone quality
Adjust the L and R volume levels separately using their MASTER
[VOLUME] knobs. You can adjust the EQUALIZER ([LOW]/[HIGH]
knobs) independently for the L and R sides. Basically, they should be
set to the same positions, but you can adjust each one as necessary
to suit the needs of a particular setup.
1.
.
3.
.
5.
.
Using a stand
Using the BA-330’s stand
When using the BA-330 on oors, or in other low-lying positions,
then setting up and using the arm stand can make it easier to hear
the sound from the speakers.
Using the arm stand
Turn the BA-330 over and raise the arm stand.
Arm stand
Place the BA-330 on a at and level surface.
CAUTION
When turning the unit upside-down, handle with care to avoid
dropping it, or allowing it to fall or tip over.
When using the arm stand, always be sure to place it so the BA-330
remains level.
When not using the arm stand, fold it up.
Never lift up and carry the BA-330 by holding the folding stand.
Never place any objects on top of the BA-330 when using the arm
stand. Also, never sit or lean on the folding stand.
When folding the folding stand, be careful not to pinch your ngers.
1.
.
•
•
•
•
•
•