Roland Atelier AT-80SL, Заметки по обслуживанию

Страница: 145 / 174

160
Jun. 2005
ERROR MESSAGES
Error Message Meanings
Copy Protected. Can’t Save To protect the copyright, this music file cannot be saved as SMF format.
Can’t Save This Song. You can only play the music data. It cannot be saved on a floppy disk or internal memory.
Write Protected Disk The protect tab on the floppy disk is set to the Protect position.
Change it to the Write position and repeat the procedure.
Master Disk This floppy disk cannot store the format or save any data. Insert a different disk and repeat the procedure.
Read Only Song. Can’t Save A new song cannot be saved onto this floppy disk.
No Disk No floppy disk is connected to the disk drive. Insert the disk correctly, and repeat the procedure.
Disk Full There is not sufficient space left on the floppy disk for the data to be saved. Save the data onto a different floppy disk or delete
music data on the disk.
Unknown Disk The floppy disk inserted into the disk drive cannot be read.Please format the floppy disk.
Disk Ejected The floppy disk was removed from the disk drive while loading or writing was in progress. Insert the floppy disk and repeat
the procedure.
Damaged Disk This floppy disk is damaged and cannot be used. Insert a different disk and repeat the procedure.
Can’t Read This song cannot be read.
Can’t Play It cannot be read the floppy disk quickly enough. Press the [Reset] button, then press the [Play/Stop] button to play the song.
Memory Full The Rhythm data is excessively large, and cannot be loaded.The performance data is excessively large, and cannot be load-
ed.Since the internal memory is full, recording or editing is not possible.
MIDI Buffer Full The AT-90SL cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI data
sent to the AT-90SL.
Communication Error A MIDI cable or computer cable has been disconnected. Connect it properly and securely.
Computer I/F Error The Computer Switch is set to a wrong position or the computer is set wrongly. Switch off the AT-90SL then set the Computer
Switch to the correct position and set the computer correctly. After that, switch on the AT-90SL again.
Memory Error There is something wrong with the system. Repeat the procedure from the beginning.
Expansion Board Not Found. An error with the instrument.
Internal Memory Near Limit The AT-90SL is warning you that its memory will soon become full to capacity, so not much more recording can be done.
Clear Song OK? To carry out the procedure, you first need to erase performance data in the AT-90SL. This message asks you to confirm that
you don’t mind doing this. To erase the data, touch <OK> on the screen.When you do not want to erase it, touch <Cancel>
then save the data on disk.
Overwrite Regist OK? This Registration is already being used. To overwrite the previous Registration data in this memory, touch <OK>. If you de-
cide to keep the previous Registration data in this memory and save your settings in an unused memory, select a number for
which “- - -” is displayed, and then save the data.
Overwrite Song OK? There already is performance data having the same name on the disk.To replace the existing data with the new version, touch
<OK>. To save it as a separate new file, touch <Cancel> first. Then, after changing the name, save it on disk.
Overwrite Rhythm OK? Overwrite the internal Rhythm.
To replace the Rhythm, touch <OK>. When you do not want to overwrite it, touch <Cancel> then select another Rhythm.
Delete Song OK? Delete the song stored on floppy disk.
To delete the song, touch <OK>. When you do not want to delete it, touch <Cancel>.
Delete Rhythm OK? Delete the Rhythm.
To delete the Rhythm, touch <OK>. When you do not want to delete it, touch <Cancel>.