Roland A-88 Скачать руководство пользователя страница 41

Страница: 41 / 64

Changing the A-88 Settings

Changing the Velocity Curve (VELO CURVE)

For details on this value, refer to p. 12.

* Values outside the acceptable range (5–) will not be entered.

Value

0–4

0–4

Value

Setting

Explanation

SUPER LIGHT An even lighter setting than LIGHT.

LIGHT

This sets the keyboard to a light touch. You can achieve fortissimo (ff) play with a less

forceful touch than usual, so the keyboard feels lighter. This setting makes it easy to

play, even for children

MEDIUM

(default)

This sets the keyboard to the standard touch. You can play with the most natural

touch. This is the closest to the touch of an acoustic piano.

HEAVY

This sets the keyboard to a heavy touch. You have to finger the keyboard more

forcefully than usual in order to play fortissimo (ff ), so the keyboard touch feels

heavier. Dynamic fingering adds even more feeling to what you play.

SUPER HEAVY An even heavier setting than HEAVY.

Specifying the Keyboard Velocity Value (KEY VELO)

For details on this value, refer to p. 12.

Value

0–127

0–9

Value

Setting

Explanation

TOUCH

(default)

The velocity value that’s transmitted will depend on the keyboard sensitivity and

change curve you specify in “Changing the Velocity Curve (VELO CURVE)” (p. 41).

1–127

FIXED VALUE The velocity value you specify here will be transmitted regardless of how strongly

you play the keyboard.

Содержание A-88

































































Результаты поиска

Содержание A-88

Отзывы:

Roland A-88, Руководство пользователя, Страница: 41 / 64

Результаты поиска

Содержание A-88

Отзывы: