15
ROL | ERGO Sweden W: www.rolergo.com P: +46 36 36 88 80
5.
MAINTENANCE & REPAIRS
5.1
Cleaning, Inspection & Storage
Clean the desk stand by wiping it down with a dry microfiber cloth. Never use solvent,
abrasive or corrosive compounds.
Products must be cleaned at regular intervals to remove dust and dirt and inspected
for mechanical damage and normal wear and tear. Worn-out parts must be replaced.
Unplug the power cord if you do not intend to use the desk for a longer period.
Do not store desk or cables in direct sunlight.
5.2 User Maintenance
Products are closed units and require no internal maintenance. Columns must be
inspected at attachment points, wires, cabinet, and plugs, check that columns function
correctly.
•
Inspect columns for loose connections and damaged plugs/wires.
•
Inspect power supply for loose connections and damaged plugs/wires.
•
The power supply and the handset is sealed and maintenance free.
5.3 Repairs
Check all screws and bolts after the first week of use and tighten screws and bolts
where necessary to ensure safe operation of the desk. If the desk cannot be raised or
lowered, check the cable connection between:
•
The power supply and the motor/motor house (column system).
•
The handset and the motor/motor house.
•
The columns/motors.
If the desk still does not operate, the control system may have triggered the
overheating or duty cycle protection. Please wait for at least 9 minutes and try again
before proceeding.
If a control unit is replaced, a manual reset is required. Follow the steps as shown in
section 4.2.
See Appendix for troubleshooting. If the desk is still not operational, please contact
your vendor for further assistance.
