Inserting the Batteries
in the Remote
1
IR receiver
Status light
Audio
Composite
video
Optical
audio
Component video
S-Video
Home
Up
Right
Left
Select
Down
Power
Ethernet
HDMI
Reverse scan
Play/Pause
CMYK
4c/4c
Forward scan
Reset
button
2
3
On your TV
Use the remote to follow the onscreen instructions.
If your TV supports other audio/video inputs and you purchased the
required cables, you can setup your Player for better resolution. The
following chart ranks the resolution for each setup option:
On your computer
Go to
www.netflix.com/activate
and enter your activation code.
The Netflix Player by Roku
Slide the top panel upward to open the remote.
Put two AAA batteries (included) in your remote.
Make sure your TV is on and is set to display the correct video input.
TIP:
Point your remote
directly at your
Player.
TIP:
For Wireless you need:
• Wireless Network name
(SSID)
• Security Key or Passphrase
Or
Continued
Internet router
Internet router
Wired:
Use an Ethernet cable (not included) to connect your Player to
your router.
Video
Composite
S-Video
Component
HDMI
Audio
Stereo
Optical
HDMI
4
Completing Guided Setup
Connecting Your Player
to Your TV
Connecting Your Player
to Your Home Network
TV
Your Player supports both wireless and wired networks. Choose the
setup that is best for your network.
Wireless:
Place your Player within range of your wireless network.
NOTES:
• If you use an HDMI video cable, you don't need a separate audio cable.
• Video/Audio quality may be compromised based on the speed of your broadband
Internet connection.
• For additional information on alternate setups, see
The Netflix Player by Roku
User Guide
at
roku.com/support
.
DOC-001-02
