Roksan Audio ltd
Xerxes.20
plus
Record Player User Manual
General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 11 of 22
ENGLISH
View from B
View from A
Motor Pulley & Inner/outer platter
alignment
Fitting Drive Belt, Outer Platter & Level Adjustments
1
Carefully place/fit tone arm counter weight
2
Carefully remove the motor transit screw (place in a bag and store
in the packaging carton for future use)
3
Remove the Drive belt from the bag and gently place it around the
inner platter and the motor pulley (
Note:
The Xerxes.20 will
perform better when the belt is
not
inside out and when it is the
right way up! To check for this consult Roksan Audio or your
Roksan retailer/distributor)
4
Remove outer platter from the bag and gently place it upside down
over the inner platter and seat it correctly on its recess. To avoid
marking/tarnishing the platters use the cotton gloves provided.
(Be
extra careful to ensure the platter does not slip through your
hands as this could seriously damage your record player)
5
Check the alignment of the sub-plinth against the top plinth by
looking at the level all the way round (If necessary realign the sub-
plinth; see below)
6
Check the alignment of the motor pulley against the inner/outer
platter by looking in the directions
‘A’ & ‘B’
(View the Top edge and
the Flange of the pulley to see if it is level with the inner/outer
platter) for this adjustment see instructions below
Drive Belt Direction
To establish the correct belt
direction, try the belt inside out
first and then upside down and
each time listen to find out
which way round the music
‘flows’ better.
4
A
B
1
2
3
:
Sub-plinth
should be level
with Top Plinth
all the way round
NOTE:
Tonearm/counter weight & Platters must be
fitted when checking level adjustments
