user manual
10
SETTING/CHANGING ACCESS CODES
STEP
DESCRIPTION
1
The system must be disarmed).
Enter the
User Functions Mode
(
✱
) and select
Codes
(5):
2
Enter the 4-digit (or 6)
Master (or higher authority) Code,
and
press [
ENTER]
3
Enter the two digit User Index number 00 to 98
Note: the index number
00
belongs to the
Grand Master
Example:
For User Code 6, press
For User Code 12, press
4
Carefully enter the new
code
and press [ENTER]
If successful, you will hear a single confirming beep.
If not, you'll hear three quick error beeps;
5
Repeat steps 3 and 4 for additional codes until
complete.
6
When all codes are entered press
key twice quickly
to reset and exit user function mode.
