rojaflex 90100087, Оригинальная инструкция по сборке и эксплуатации

Страница: 10 / 20

10
www.rojaflex.com
4. Delete wall transmitter
3. Add wall transmitter
At an ALREADY programmed
station, select an already pro-
grammed channel by pressing
the K1 (or K2) key.
Then, at the NEW station to be
learned, select the channel you
want to add by pressing the K1
(or K2) key (the channel high-
lighted in black is selected).
Then press the P2 program-
ming button 1 x on the wall
transmitter to be reprogram-
med.
The motor (shutter) briefly
moves UP/DOWN and/or the
receiver beeps.
OK!
Handheld transmitter is
added.
Press the P2 programming
button 3 times on the wall
transmitter that has already
been programmed.
P P P
Important:
In systems with SI (single-directional system / one-way communication), the P2 key of
the already taught-in handheld transmitter is only pressed 2x!
This applies, for example, to the MLSF/MLMF drives and the REHK-1 and RUE-UP external recei-
vers.
Please observe the instructions for the respective receiver/motor.
Individual deletion of hand-held or wall-mounted transmitters is NOT possible!
For more information, please refer to the instructions of the Rojaflex radio tubular motors or radio
receivers.
1. Power is ON (motor is connected and ready for operation).
2. Press P2 programming button 1 x. Motor beeps 1 x.
3. Press STOP key 1 x. Motor beeps 1 x.
4. Press P2 programming button 1 x. Motor beeps 3 x*.
OK! ALL wall (hand) transmitters are deleted!
* The frequency of the beeps or the response of the motor / shutter depends on the receiver.
Please refer to the corresponding instructions for the respective receiver/motor.
Programming and settings