background image

2

Programmable thermostat

EASY SETUP GUIDE

ST.2

EN

USER OPERATION

1. On / Off  “   ”

2. Press  “ ”  or  “   ”  to increase or decrease the temperature.
3. Press “

 “ and  “ ”  hold for 5 seconds at the same time to adjust time. 

Press  “   “ to choose object to adjust; Press  “ ”  or  “   ”  to increase or decrease 
your set  values; Press  “   ” to confirm and exit.  

4. Press  “   “  key to select manual mode or clock-controlled program mode.
5. It displays the time or the temperature alternatively, and it displays the measured

temperature directly.

6. When you press   “ ”  and  “

 ”  at the same time and hold for 5 seconds, the 

thermostat will be locked/unlocked. When it is locked, no operation can be carried 
out until it is unlocked.

PERIOD PROGRAMMING

Press  “   “  key and hold for 5s to start programming.

KEY

EVENT

SYMBOL

TIME

MODIFY

TEMP.

MODIFY

Day

1-5

1

06:00

Event

Time

20ºC

Temp.

2

08:00

15ºC

3

11:30

15ºC

4

12:30

15ºC

5

17:00

22ºC

6

22:00

15ºC

Day

6-7

1

08:00

22ºC

2

23:00

15ºC

SENSOR FAILURE

E0

: Built-in sensor short-circuited or disconnected.

E1

: External sensor short-circuited or disconnected.

When shows E0/E1 error, thermostat must be checked until the error is eliminated.

ADVANCED SETTINGS

When the thermostat is powered off, press  “   “  &  “   ”  keys simultaneously.

1ADJ: Temperature calibration

Press 

“ ”

 or 

“   ”

 key to adjust present checked value, 

adjustable scale: ±9,9ºC
Press 

“   “

 key to enter to next step.

2SEN: Sensor mode

Press 

“ ”

 or 

“   ”  key to choose sensor working mode 

IN: built-in (air). OUT: floor sensor. All: both sensors, in this 

mode floor sensor will be the limit sensor.

Press “   “

 key to enter to next step.

3LIT: Max. floor temperature

Press 

“ ”

 or 

“   ”

 key to set the temperature floor.

Range: 5~60ºC

Press “   “

 key to enter to next step.

4DIF: Sensor tolerance

Press 

“ ”

 or 

“   ”

 key to set your sensor tolerance.

Range: 0,5~10ºC

Press “   “

 key to enter to next step.

5LTP: Anti-frost mode

Press 

“ ”

 or 

“   ”

 key turn on/off.

If you activate it, the anti-frost will start when the thermostat 
is off.

Press “   “

 key to enter to next step.

12345

6PRG: Set program day mode

Press 

“ ”

 or 

“   ”

 key to choose your program day cycles: 

5/2 days; 6/1 days; 7 days.

Press “   “

 key to enter to next step.

Not applicable to electric systems.
For Rointe electric systems, please skip this step.

7RLE: Potential-free output and main power output in 
same/different way

Press 

“ ”

 or 

“   ”

 key to change the present linkage state.

00: in same way; 01: in different way.

Press “   “

 key to enter to next step.

Not applicable to electric systems.
For Rointe electric systems, please skip this step.

8DLY: Delay time of potential-free output

Press 

“ ”

 or 

“   ”

 key to change the present linkage delay 

time.
Range: 0~5min

Press “   “

 key to enter to next step.

9HIT: Max. air temperature

Press 

“ ”

 or 

“   ”

 key to set the temperature air.

Range: 35~90ºC

Press “   “

 key to enter to next step.

AFAC: Reset to factory settings

Press 

“ ”

 key for 5 seconds until the screen shows 

Range: 35~90ºC

Switch thermostat off to save your settings

.

GUARANTEE

Rointe guarantees this product, to be free from defects in the workmanship or materials, 
under normal use and service, for a period of two (2) years from the date of purchase by 
the consumer. If at any time during the guarantee period the product is determined to be 
defective, Rointe shall repair or replace it, at Rointe’s discretion.

If the product is defective, please either,
i) return it, with a bill of sale or other dated 
proof of purchase,  to the place from which 
you purchased it or
ii) contact Rointe. Rointe will determine
whether the product should be returned, 
or replaced.
This guarantee does not cover removal 
or reinstallation cost, and shall not apply 
if it is shown by Rointe that the defect or 
malfunction was caused by damage which 
ocurred while the product was in the 
possession of the end user.
Rointe’s sole responsibility shall be to repair 
or replace the product within the terms 
stated above.

ROINTE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM 
ANY BREACH OF ANY WARRANTY, EXPRESSED OR IMPLIED, OR ANY OTHER FAILURE OF THIS 
PRODUCT. THIS WARRANTY IS THE ONLY ECPRESS WARRANTY ROINTE MAKES ON THIS 
PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES FOR 
COMMERCIAL USE OR FIT FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE TWO-
YEAR DURATION OF THIS WARRANTY.
This Warranty does not affect your statutory rights.

Please register your product at: 

www.rointe.co.uk

Содержание ST.2









Отзывы: