4
2. Rointe towel rails installation
2.1. Mounting instructions
Inside the packaging you will find a fixing kit. Please find the instructions below:
ITEM
ELEMENT
QTY.
A
Bleeding valve key
1
B
Bleeding valve 1/2”
1
C
Blind tap
1
D
Friction Cups / Cushions
4
E
Left bracket
2
F
Right bracket
2
G
Screw 5.5 x 45 mm
8
H
Wall plug
8
Fit bleeding valve (B) and blind tap (C).
Use Rointe bleeding valve key (A) to turn
bleeding valve (B). Accurately mark out
bracket holes on wall using spirit level.
Drill four 8 mm diameter holes for upper
brackets (E) and four 8 mm diameter holes
for bottom brackets (F).
Friction cups (D) MUST be fitted to each
mounting brackets (E, F) to avoid potential
noise. Screw brackets (E, F) into wall plugs
(H) with 5,5 mm diameter x 45 mm screws
(G). Hang radiator by sliding the bosses on
the back of the radiator into brackets (E, F).
2.2. Connecting instructions
The connection must be carried out in compliance with the current safety regulations. This appliance
is intended to be permanently connected to a fixed water installation.
If possible, the appliance must be installed away from draughts (windows, doors) or anything else that
might interfere with heat dissipation. In this way, it will provide the best thermal comfort. Place any
object that could impede air circulation (furniture, armchairs) 50 cm from the front of the appliance.
The appliance must not be placed in front of or directly below a fixed electric socket. The lower part
must be at least 15 cm above the floor.
