Rointe RD SERIES Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 20

Rointe RD SERIES Скачать руководство пользователя страница 16

16

10. GUARANTEE

10.1.

Rointe guarantee all electrical and mechanical controls supplied with the cylinder for

a period of 2 years from the date of purchase provided that they have been installed for their
intended use by a competent person and have not been modified in any way.

10.2.

In addition Rointe also guarantees the hot water cylinder for a period of 5 years from the

date of purchase against faulty material or manufacture provided that:

a)

It has been installed by a competent person in accordance with this installation manual

and all current regulations and codes of practice at the time of installation.

b)

It has been used solely for the purpose of heating potable water that complies with

current (at the time of installation) UK standards and is not fed with water from a private

source.

c)

It has not been modified in any way.

d)

It has not been subjected to excessive pressure or electrolytic action from dissimilar

materials, or attack from any salt deposits.

e)

It has been installed indoors in a frost-free environment.

f)

The warranty card is completed and returned to Rointe within 90 days of installation.

This warranty is not transferable. This warranty does not include claims due to frost or lime scale
damage. Proof of purchase will be required against any claim. This guarantee does not affect
your statutory rights.

For help about the RD Series please contact the Rointe Customer Services Department:

Tlf: 0845 604 5987

Fax: 0208 953 5861

11.

European Directive 2002/96/EC

Under the European Directive 2002/96/EC on waste electrical and electronic equipment (WEEE), the

apparatus cannot be disposed in the usual council bins and containers. They must be separated to

optimize the recovery and recycling of all of the components and materials and reducing the impact

to human health and the environment. The symbol of the container crossed out over a horizontal

line marks all of ROINTE’s products to remind the consumer of the obligation to separate them on

disposal.The consumer should contact the local authority or original point of sale to learn more about
the correct disposal of this product.

«
...
14
15
16
17
18
...
»

Содержание RD SERIES





















Отзывы:

Нет отзывов