Warning
8
Adapter Usage
AC Power Interface
Status Indicator LEDs
Displaying Status
Performance Characteristics
Abnormal (yellow flashing)
Discharging
Charging
Yellow flashing in abnormal, turn off in 20s
；
Remarks:
Indicates that the flicker is off
；
Indicates Flashing
；
2. Charge
Attach the vacuum cleaner to the wall suction fixing box, pull
out the rubber plug of the power interface, and insert the
adapter connector, At this point, the charging indicator light
increases successively according to the power condition,
indicating that the vacuum cleaner is charging, and when the
indicator light is fully on, the vacuum cleaner battery is full.
1. For indoor use only,do not expose to rain;
2. If the cord is damaged, it must be replaced by the manufacturer, our service agent or a qualified person in order to avoid a hazard;
3. The charger must not be used if the enclosure is damaged because this might cause a hazard of electric shock;
4. The power adapter is only used for the indicated vacuum cleaner;
5. Before charging, check whether the voltage specified on the marking label corresponds to the mains voltage;
6. Keep the charger from all sources of heat;
7. Do not immerse the appliance in water;
8. Do not continue to use the appliance in the following cases: a drop, impact by a heavy object, other means of damage, etc. If it occurs, get the
charger repaired by our service agent;
9. Do not disassemble the battery charger by yourself to avoid fire hazard or electric shock;
10. Remove the plug from the socket before cleaning or maintaining the charger;
11. Do not try to charge non-rechargeable batteries with this charger.
1. Fix the charging cable
Before charging, make sure that the adapter is connected to the
rated AC power supply. The charging cable is stuck into any
power line slot on both sides of the wall suction fixing box to help
fix the charging cable.
Indicates that it is always on
；
