ROHS EmCORE-i2702 Скачать руководство пользователя страница 47

Страница: 47 / 73

- -

BIOS

Boot Up NumLock Status

It allows you to activate the NumLock function after you power up the

system.

Setting: Off, On (Default).

Boot Other Device

It allows the system to search for an OS from other devices other than the

ones selected in the First/ Second Boot Device.

Setting: Disabled (Default), Enabled.

First Boot Device

These fields determine the drive that the system searches first for an operating

system. The options available include

Setting: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,

USB-CDROM, LAN and Disabled.

Quick Power On Self Test

When enabled, it speeds up the Power On Self Test (POST) after the system

is turned on.

If it is set to Enabled, BIOS will skip some items.

Setting: Disabled, Enabled (Default).

Hyper-Threading Technology

If enabled, when your processor supports Hyper-Threading Technology.

Setting: Disabled, Enabled (Default)

Second Boot Device

These fields determine the drive that the system searches second for an

operating system. The options available include

Setting: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,

USB-CDROM, LAN and Disabled.

Содержание EmCORE-i2702










































































Результаты поиска

Содержание EmCORE-i2702

Отзывы:

Похожие инструкции для EmCORE-i2702

Бренды по названию

Популярные бренды

ROHS EmCORE-i2702, Руководство пользователя

Результаты поиска

Содержание EmCORE-i2702

Отзывы:

Похожие инструкции для EmCORE-i2702

Бренды по названию

Популярные бренды