manualshive.com logo in svg

Rohrman Schweißtechnik TIG, Руководство по эксплуатации

Поделиться
Скачать
Rohrman Schweißtechnik TIG Скачать руководство пользователя страница 12

2.4.7 Explosion danger

2.4.8 Fire hazard

Safety

12

DANGER

Explosion danger during welding!

Welding on containers, apparatus or pipelines may lead to explo-
sions. Please obey the following directions in order to avoid the 
unleash of explosions:

Please obtain the approval for welding operations. Never weld 
in areas marked as potentially explosive .

Make sure that no explosive atmosphere existst in the welding
area.

Empty the container, clean and fill with protective atmosphere.

Make sure that no excess pressure arises.

WARNING

Fire hazard while welding!

Fire may occur during and after welding! Please obey the following
notices in order to avoid the arising of fire:

Remove or cover flamable materials from the working area or
from the workwear.

Seal or shield areas with incombustible materials.

Provide extinguishing agent.

Organise before and after welding fire posts or fire guards.

BA_WIG-Brenner_GB_BA-WIG-GB  04.11.14  16:32  Seite 12

Содержание TIG

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды