9
6:
For mattress overlays and O.R. Pad:
To adjust for the proper immersion level of each
product section, slide your hand between the product surface and the individual’s lowest bony
prominence. Turn the valve
counter-clockwise
to open, and release air until the area of high
risk is within the suggested Inflation Guidelines (see the next page). Turn the valve
clockwise
to close. Repeat Step 6 for the remaining product sections.
NOTE
: The adjustment sequence noted in the image is ROHO's recommendation; the
sequence for adjusting the product may vary for each individual.
NOTE:
Confirm proper adjustment after transferring the individual back onto the product.
3:
Slide the pump’s rubber nozzle over the
valve and inflate until the product arches
slightly upward.
4:
Turn the valve
clockwise
to close
.
Remove the pump. Repeat steps 2 and 3 for
remaining sections.
5: For mattress overlays only:
Reapply bed linens (maximum one sheet, one draw sheet, or one
incontinent pad). Place the individual on the mattress overlay in their normal lying position.
Linens not shown.
ADJUSTMENT INSTRUCTIONS, Continued
