Kettle R-7520
EN
6
•
The kettle will not re-boil until the on/off switch is again switched ON. Wait 25
seconds, allowing kettle to cool down, then switch ON.
CLEANING AND CARE OF YOUR ELECTRIC KETTLE
•
Mineral deposits in tap water may cause scale deposits to form inside the
electric kettle after frequent use. To remove this scale build-up, fill the kettle
with a solution of 3 cups of white vinegar and 3 cups water. Let sit overnight.
•
Empty the vinegar solution from the electric kettle. Remove any stain
remaining inside by rubbing with a damp cloth.
•
Fill the electric kettle with clean water. Place kettle on power base and bring
to a boil, then discard water. Repeat and the electric kettle will be ready to
use.
•
The electric kettle will not operate again until the on/off switch is pressed
downward.
•
Always remove kettle from power base and disconnect power base from
electrical outlet before cleaning. Do not immerse kettle or power base in water
or other liquid.
•
The outside of the electric kettle can be wiped with a soft damp cloth.
NOTE: Never use any chemical, steel wool, or abrasive cleaners to
clean any part of the kettle, including the power base.
TECHNICAL SPECIFICATIONS
Rated voltage range
220-240 V
Rated frequency
50/60 Hz
Rated maximum power input
1850-2200 W
Capacity
1.7 Lt
