5
the device too fast.
Do not fill above max level.
Never immerse the appliance power base unit, or mains plug in water or
other liquid, nor wash in a dishwasher, nor use in bathroom or any other
places with a high rate of moisture.
NEVER leave the power base unit and electrical connection ends of your
device in a damp state. If they get wet unplug before drying and do not
operate the appliance before having it dried completely.
Do not turn the electric pot on when it is not filled with water.
When there is no water inside the appliance, always switch off the
appliance.
USING THE ELECTRIC POT
When in use, the outer surface of your appliance becomes heated.
Therefore, you should not touch the hot surfaces. When water starts
boiling, keep your hands away from the spout.
The appliance must be switched off automatically or manually before
attempting to lift the kettle from the power base unit.
Do not use your electric pot for any other purposes other than boiling water
Do not fill with any other liquids or solutions.
Before using for the first time, clean the appliance and then fill water up to
the MAX level. Turn off your appliance when the water starts boiling.
At this point make sure that the water is filled up to the maximum level.
Pour away the water and allow your appliance to cool down.
After boiling the water some powder like scale may form due to the
hardness of the water. This is quite natural and has no adverse effects for
human health.
FILLING WITH WATER
When filling with water, ALWAYS remove the reservoir from its power
base unit. By doing so, you can prevent the water pouring on the
