Fix the front guard
• Position the front guard (1) over the rear guard (5) while ensuring the marks
“I” and “II” on the front guard are up, and align the mark “I” on the front guard
with the mark “I” on the rear guard.
• Then turn the front guard clockwise until the mark “I” on the rear guard is
located in the center of the mark “II” on the front guard.
• Finally tighten the front guard with the safety screw.
OPERATION
Caution:
Make sure that the product is placed on a flat and stable floor. The power
socket must be in the vicinity of the device and easily accessible. Always
position the power cord so that nobody can trip over or become entangled in
it.
1. Connect the mains plug of the power cable to the mains (220 - 240 V/AC,
50 Hz)
2.Push the oscillation knob to oscillate. Pull the oscillation knob to stop.
3.Plug the fan into a mains socket
，
select the desired speed settng
。
There are
4 settings
-0 (off)
-1 (low)
-2 (medium)and
-3 (high)
