5.1
6.1
Remote control:
7
、
Press
“
”
as follows: ON(only Fan working), OFF(Fan
keep working for 60 seconds when shutdown the appliance
after heating)
8
、
Press
“
”
as follows: Low heat, High heat, FAN working.
See picture2.1-4.1;
9
、
Press
“
”
as follows:, SWING ON, SWING OFF. See
picture 9.1;
10
、
Press
“
”
to set timer as follows: 0.5h
、
1.0h
、
1.5h.....7.5h See picture10.1-10.4;
11
、
Press
“
”
to start and stop temperature setting
；
Press
“
”
before setting temperature. Press
“
+
”
“
-
”
to set temperature, Temperature range: 18-45
℃
See picture
11.1-11.2
，
For example, Environment temperature is 25, low heat
，
See picture 11.3
：
Set temperature is equal to or lower than Environment
temperature, appliance will stop heating. See picture 11.4-11.5
Set temperature is 1-2
℃
higher than Environment
temperature, appliance will stop heating. See picture 11.6-11.7
Set temperature is higher or equal 3
℃
to Environment
temperature
，
appliance will start heating. See picture 11.8
Note
：
1
、
While setting temperature in low heat mode,then the
appliance will be still working in low heat after standby.
While setting temperature in high heat mode,then the
appliance will be still working in high heat after standby.
2
、
When the environment temperature reaches the setting
temperature:
2.1 Stop heating
，
the heating indicator light flickers
；
2.2 If swing on, the swing will stop,and its indicator
light flickers
2.3 Fan keep working for 60 seconds while fan
indicator light flickers, then the appliance will be standby.
3
、
Press
“
”
or
“
”，
shutdown the setting temperature
mode.
Note: The indicator lights when corresponding function is
working
