Rohnson R-5795 Скачать руководство пользователя страница 3

Hand blender set R-5795 

EN 

 

 

 

 

The  use  of  accessory  not  recommended  by  the  manufacturer  may  cause 

injuries to persons. 

 

Do not operate the appliance for other than its intended use. 

 

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety. 

 

Do not use outdoors. 

 

Never let the appliance run unattended.  

 

Take care of potential injury from misuse. 

 

Care  shall  be  taken  when  handling  the  sharp  cutting  blades,  emptying  the 
bowl and during cleaning. 

 

Switch  off  the  appliance  and  disconnect  from  supply  before  changing 

accessories or approaching parts that move in use. 

 

Never touch the blades when the appliance is plugged in. The blades are very 
sharp. 

 

If  the  blades  get  stuck,  unplug  the  appliance  before  you  remove  the 

ingredients that block the blades. 

 

Do not overload the appliance by putting in too much food and do not operate 

continuously for more than 30 seconds. 

 

This appliance is intended to be used in household and similar applications 
such as: 

 

staff kitchen areas in shops, offices and other working environments;   

 

farm houses;   

 

by clients in hotels, motels and other residential type environments;   

 

bed and breakfast type environments.   

Содержание R-5795











Отзывы: