Introduction
To get the most out of your new heater, please read through these instructions and the
attached safety regulations before use. Please also save the instruction manual in case you
need to remind yourself of the heater’s functions at a later date.
Technical Specification
Details
R-028
Voltage
220-240V~
Frequency
50Hz
Power
1000/2000W
IP Waterproof IP24
Important
Before plugging the unit into the mains, ensure by visual inspection that the unit is intact
and has not suffered any damage during transit.
Caution
The appliance must be always placed on a flat and stable surface.
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected to
a circuit that is regularly switched on and off by the utility.
For your own safety
1. Read all instruction before using the heater.
2. Only connect the heater to a single-phase socket with a mains voltage as specified on
the rating plate.
3. Do not leave your home while the appliance is in function: ensure that the switch is in
OFF (0) position and the thermostat is in minimum position. Always unplug the
appliance.
4. Keep combustible material such as furniture, cushions, bedding, paper, clothes,
curtains etc. at least 100cm away from the heater.
5. Do not hand anything on or in front of the heater.
6. Always use the heater in an upright position.
7. Do not place the heater against walls, furniture, curtains, etc.
8. Do not use the applianc
e in rooms less than 4m² area.
9. Always unplug the heater when not in use. Do not pull the cord to unplug the heater.
10. Keep the air inlet and outlet free from objects at least 1m in front and 50cm behind the
heater.
