Instructions for Use
20
Power on
01. Make sure the power switch on the side of the robot is turned on.
02. Press the Control
button“ ” or the Cleaning mode on the remote controller to run the robot.
Pause
The pause function is to switch the robot from the operating mode to the selected mode,
and the robot can be paused by the following operations:
01.
Press the
“
” button on the robot to pause the robot.
02.
Press the power on/off button on the remote controller to pause the robot.
Notice: After the machine is paused, the machine can be re-operated.
Sleep
Sleep mode means that the robot is stopped and the indicator light is off. If the Robot is not
active within 10 minutes, the robot will enter Sleep mode automatically.
Note: If the robot is out of service for a long time, please turn off the power switch.
Switching Modes
Содержание Mamba RM-02
