Sensor Evaluation Kit User Manual Rev1.0
17
Designator
Position
Description
J7
2-1
Enable ML8511 (U59)
2-3
Disable ML8511 (U59)
Table 4: ML8511 Breakout Board – Jumper Positions
The UV intensity of the UV sensor surface (UVI) is calculated as follows:
Where V is the voltage at the output pin of ML8511.
The feedback LEDs display the 8bit ADC value scaled down from the 10bit ADC at the output pin of ML8511 (via 2bit right
shift).
Figure 29: ML8511 Breakout Board – Sample Output
Figure 28: ML8511 Breakout Board Schematic
