Rohm RKX-EVK-001, Руководство пользователя

Страница: 37 / 56

37/55
© 2022 ROHM Co., Ltd. No. 64UG118E Rev.002
Feb.2022
User’s Guide
1.5
User Interface - Status bar
Figure 64. Status bar
The status bar shows the following information:
•
Current connection interface (USB / Bluetooth) ( 1.3.3Connection – Menu )
•
COM port ( 1.3.5.4 COM port )
•
The status of the communication (Streaming, Connected, Disconnected, No Data)
•
Real-time Output Data Rate (ODR) information
•
Selected Stream ( 1.3.6 Stream - Menu )
•
Selected Board ( 1.3.7 Board – Menu )
•
Reference line value ( 1.3.8.3 Reference line )
•
Angle calibration status for select streams ( 1.4.2 Angle Calibration – Tab )
NOTE: Bluetooth communication is not supported by the RKX-EVK-001.
NOTE: It is normal to see a slight variation in the ODR value. Data is received at varying intervals and the ODR is calculated when ROHM EVK
GUI SW receives the data from the used connection layer.
1.6
User Interface - Pop-up windows
The application makes use of pop-up windows to notify the user about important actions. This section provides detailed information about pop-up
windows.
1.6.1
No data pop-up window
“No data received” pop-up window (Figure 65) appears when streaming has been started, but no data is received. The problem could be an invalid
board configuration selection or some connection problem ( 4.1.1.1 “Status: EVK Disconnected” in ROHM EVK GUI SW Status Bar for details ).
Figure 65. No data pop-up window
1.6.2
Streaming pop-up window
Streaming pop-up window (Figure 66) appears in the Plotter view to notify the user about data stream enabling. Streaming can be enabled with
the specific “Streaming” – button, from Data/Streaming – menu or with the shortcut “CTRL + S”. It also possible to enable Automatic streaming
( 1.3.5.3 Automatic streaming)
Figure 66. Streaming pop-up window