Rohm Lapis MK715 1 Evaluation Kit Mini Plus Series, Руководство по оборудованию

Страница: 14 / 26

MK715x1EK1 Hardware Manual
2. Hardware specifications
FEXK715x1EK1_HardManual-01 8
2.7 LED
2.7.1 General-purpose LED
General-purpose LEDs (green) are connected to the ports from P0.17 to P0.20.
The port assignment and circuit configuration are shown below.
No Silkscreen
Printing
port LED active
LED4 P.17 P0.17 P0.17=Low
LED5 P.18 P0.18 P0.18=Low
LED6 P.19 P0.19 P0.19=Low
LED7 P.20 P0.20 P0.20=Low
2.7.2 Power LED
The Power LED (red) lights on when the power (VDDIO) to the MK715x1 is turned on.
No Silkscreen Printing
LED3 PWR
2.7.3 UART status LED
The UART status LED (green) flashes during UART transmission and reception.
No Silkscreen Printing
LED1 RX
LED2 TX
[Parts placement information]
LED2 LED1
UART
status
LED
PowerLED
LED3
General-purpose LED
LED5 LED4
LED7 LED6