Rohm KZS-P, Перевод оригинального руководства по эксплуатации

Страница: 12 / 43

2 | Safety
12 / 43 KZS-P_KZS-PG
▪ Electricians
Work on the electrical equipment may only be carried out by a qualified elec-
trician or by personnel under the direction and supervision of a qualified elec-
trician in accordance with the electrical regulations.
2.5 Personal Protective Equipment and Personnel Qualification
When working on and with the centric clamp KZS-P/KZS-PG, personal pro-
tective equipment must be worn. The owner is responsible for providing per-
sonal protective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During rotational operation of the centric clamp KZS-P/KZS-PG, no pro-
tective gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the centric clamp
KZS-P/KZS-PG is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the centric clamp may only be carried out by qualified oper-
ating and specialist personnel (see
Qualification of Operating and Special-
ist Personnel [ } 11] ).
2.6 General Dangers
When using the device there is a special potential of residual risks
▪ during assembly and set-up work,
▪ during operation and
▪ during maintenance and service work.
This potential risk cannot be completely eliminated considering the functional
availability of the operating manual. Therefore, all individual regulations of
this operating manual are to be observed.