Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
* Where indicated please specify color
Perrin & Rowe is a registered trademark.
9001307U
Issue 1
SPARES
MINI INSTANT HOT DISPENSERS
Max Temp:
For Mains: 185°F
Recommended
Working Pressures:
Min 22psi
Max 72psi
*IMPORTANT!! ENSURE A PRESSURE REDUCING VALVE (PRV) IS USED IN-LINE
WITH COLD INLET AND IDEALLY SET TO 43.5PSI (3BAR). FAILURE TO DO SO MAY
RESULT IN REDUCED PRODUCT PERFORMANCE.**
IMPORTANT WARNING!!
PLEASE ENSURE THAT THE RECOMMENDED HEATER TANK UNIT (U.1998) AND FILTER KIT (U.1106)IS
USED.
TO AVOID PRESSURISED BOILING WATER AND TO COMPLY WITH US REGULATIONS THIS IS AN OPEN
VENTED PRODUCT.
DO NOT PLUG IN THE UNIT UNTIL ALL WATER CONNECTIONS HAVE BEEN MADE AND THE TANK HAS
FILLED COMPLETELY THEN FLUSHED TO REMOVE AIR.
*IMPORTANT!! ENSURE A PRESSURE REDUCING VALVE (PRV) IS USED IN-LINE WITH COLD INLET AND
IDEALLY SET TO 43.5PSI (3BAR). FAILURE TO DO SO MAY RESULT IN REDUCED PRODUCT PERFORMANCE.*
INSTANT HOT WATER TEMPERATURES CAN REACH 210°F. THE FAUCET IS DESIGNED WITH FEATURES
TO MINIMISE RISK AND POTENTIAL INJURY; TWO ACTION OPERATION, SPRING BACK VALVE AND
DELAYED DELIVERY; BUT SHOULD BE OPERATED OR SUPERVISED BY A RESPONSIBLE ADULT.
PLEASE READ AND FULLY UNDERSTAND THE HEATER TANK INSTRUCTIONS BEFORE USE.
Registration -
Please visit
www.rohlhome.com/filtration-registration.aspx,
complete the registration card (postage paid) or
phone 1-800-777-9762 to register your product.
O
1 1/4"
HOLE
5
1 / 2
"
10"
6
1
/ 2
"
G3/8"
OUT TO FILTER
FOR HEATER TANK
O
5 I.D
SILICONE TUBE
FROM TANK
O
1 1/7"
BASE RING
5
1 / 2
"
9
1
/ 2
"
7
1
/ 4
"
5
1 / 2
"
10"
6
1
/ 2
"
U.1323: AQUITAINE
U.1347: Mimas
U.1307: Parthian
9.201887*
9.26400
9.15307
9.28620
9.28749
9.13325
9.202008*
9.201166*
U.PRF1
REPLACEMENT
NANO FILTER
9.18162*
9.18846*
9.12323*
9.12348*
9.14321*
9.17801
CARE & MAINTENANCE
• Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is
required to keep the plated finish in good condition.
• If you wish to occasionally polish your faucet and it has a Chrome, Nickel or Pewter finish, we
recommend a gentle metal cleaner or metal polish, which is available from hardware and automotive
parts stores.
• Do not use any cleaners on Gold or English Bronze Faucets.
• Do not use proprietary abrasive liquids, powders, or pads to clean the product. You will damage the
plated finish and void your warranty.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the mixer tap to avoid damaging the
finish.
• Please ensure that the installation complies with the local plumbing codes.
NOTE: Diagram shows faucet
set up with u.1998 (heater
tank) and u.1106 (filter).
FLOW REGULATOR
TO BE FITTED TO
COLD INLET 9/16"-24
ROHL WARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
For full ROHL WARRANTY please contact ROHL or visit www.rohlhome.com
Please contact the local ROHL retailer or showroom where you purchased this product for all warranty
related claims.
SPARE PARTS & SERVICE
3 Parker
Irvine
CA 92618
(714) 557-1933
www.rohlhome.com
Perrin & Rowe products are manufactured in England using
quality materials, the latest technology and built to the highest
standards.
We would like to thank you for purchasing this Perrin & Rowe
product and invite you to view the comprehensive range of Perrin
& Rowe tapware, shower fittings, bathroom accessories, soap
dispensers and bathroomware.
Please contact us to receive our latest product catalogues or
view them online at www.rohlhome.com
houseofrohl.com
Consult your local House of Rohl showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to houseofrohl.com
