www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
3
The Hot Water Dispenser Collection
Installation & User Guide
base ring
base seal
work surpace
clamp plate
nut
threaded stud
water inlet
silicone tube
seal
1.
Feed the tubes down through the hole.
In the work surface until the base seal
and base ring are at rest.
2.
From under the sink, place the semi-
circular clamping plate and fixing nuts
onto the threaded stud.
3.
Ensure the tap is the desired angle Insert
a screw driver into the hole in the hex
tool (creating a T), and use to tighten
and secure the faucet.
NOTICE
AN ASSISTANT MAY BE NEEDED TO HOLD
THE TAP IN PLACE WHILE SECURING.
TO EASE FEEDING OF THE TUBES THROUGH
THE HOLE, FIRST INSERT THE BLUE TUBE
WITH QUICK-CONNECT ATTACHMENT AND
THEN INSERT THE REMAINING TUBES.
PLEASE ENSURE YOU HAVE READ & UNDERSTOOD THE
PERRIN AND ROWE TANK GUIDE BEFORE USE.
BEFORE USE
•
If further building work is to be carried out in the vicinity, cover the faucet to avoid damaging the finish.
•
Please ensure that the installation complies with local plumbing codes.
CARE & MAINTENANCE
Wipe down after use to avoid water spotting and mineral build up.
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the plated
finish in good condition.
Don’t use abrasive liquids, powders, or pads to clean the shower. Don’t use any products with ammonia, bleach, or
limescale remover. You will damage the plated finish and void your guarantee.