How to Insert the Instrument
R&S
®
ZZK-Case
6
Assembly Instruction 1179.2590.02 ─ 01
2
How to Insert the Instrument
2.1
Preparing the R&S
ZZK-Case
To prepare the R&S
ZZK-Case, follow these steps:
1. Push down the pull-out handle (1) until it is flush with the outer shell (3).
2. Lay the R&S
ZZK-Case flat with the butterfly catches (9) facing towards you.
3. Remove the lock from the security hasp (8) if needed.
4. Unlock the R&S
ZZK-Case by turning each butterfly catch (9) until they spring
open.
5.
CAUTION!
Heavy object. If the lid is not properly opened, it can fall down and
cause injuries.
Open the lid (5) until the lid rests on the sidestraps (7).
6. Take out the additional foam spacer (6).
The R&S
ZZK-Case is prepared for inserting an instrument.
2.2
Inserting the Instrument
To insert the instrument into the R&S
ZZK-Case:
1.
CAUTION!
Heavy object. The instrument can be heavy, e.g., if fully equipped.
If weight exceeds 18
kg, carry the instrument with two people.
Use the carrying handles at the side for lifting and carrying the instrument.
Lower the instrument carefully into the R&S
ZZK-Case, so the instrument and
the engravement in the foam insert (10) align.
The instrument must be right side up and the front must face right.
2. For instruments with a height of 2 HU: Insert the additional foam spacer (6) on
top of instrument.
Inserting the Instrument