Rohde & Schwarz ZND Скачать руководство пользователя страница 30

Страница: 30 / 72

Instrument tour

R&S

ZND

Getting Started 1316.2407.02 ─ 62

●

REF IN is a BNC input for an external reference frequency. Use this connector to
synchronize the R&S

ZND to another device.

●

SYSTEM DRIVE contains the removable system drive of the R&S

ZND, containing

all software (including the operating system and the VNA application) and data. Do
not remove the system drive during operation.
Option R&S

ZND-B19 provides an additional removable system drive (including

operating system and firmware).

●

The ground connector in the lower left corner of the rear panel provides the ground
of the analyzer's supply voltage. Use this connector for ESD protection; see

"Pre-

venting electrostatic discharge (ESD)"

on page 16.

The following optional connectors can be installed in addition:

●

Option R&S

ZND-B10 provides a GPIB bus connector according to standard IEEE

488 / IEC 625.

●

Option R&S

ZN-B14, Handler I/O (Universal Interface), provides a Centronics 36

input/output connector.

Match signals with 50 Ω to comply with EMC directives. See also

Chapter 3.5, "Consid-

erations for test setup"

on page 16.

Rear panel

Содержание ZND









































































Результаты поиска

Содержание ZND

Отзывы:

Бренды по названию

Популярные бренды

Rohde & Schwarz ZND, Начало работы

Результаты поиска

Содержание ZND

Отзывы:

Бренды по названию

Популярные бренды