manualshive.com logo in svg

Rohde & Schwarz ZND Series, Начало работы

Поделиться
Скачать
Rohde & Schwarz ZND Series Скачать руководство пользователя страница 18

Putting the Analyzer into Operation

R&S

®

ZND

18

Getting Started 1316.2407.02 ─ 52

You can load updated and improved driver versions or new drivers from an installation
disk, USB memory stick or another external storage medium. Alternatively, if the ana-
lyzer is integrated in a network, you can install driver data stored in a network directory.
In either case, use the "Add Printer" wizard to complete the installation.

Printer configuration

Use the "Printer Setup" dialog of the firmware (SYSTEM – [PRINT] > "Print...") or the
Windows

®

 printer management to configure the printer properties and printing prefer-

ences.

3.9.5

 

Connecting a LAN Cable

A LAN cable can be connected to the LAN connector on the rear panel of the analyzer.
To establish a LAN connection, proceed as follows:

1. Refer to 

Chapter 7.3.1, "Assigning an IP Address"

, 

on page 65.

2. Connect a CAT6 or CAT7 LAN cable to the LAN port.

The LAN port of the analyzer is an auto-crossover Ethernet port. You can connect it to
a network, but you can also set up a direct connection to a computer or another instru-
ment. For both connection types, you can use either crossover or straight through
(patch) cables.

The IP address information is displayed in the SYSTEM – [SETUP] > "Remote Set-
tings" softtool tab.

3.10

 

Minimizing the VNA Application

With a minimized VNA application, you can access your analyzer's Windows

®

 desktop

or run other applications.

To exit the default full-screen mode of the VNA application, deselect SYSTEM – [DIS-
PLAY] > "View Bar" > "Title Bar Task Bar". Then use the standard Windows

®

 titlebar

functions to minimize/maximize/close the application window.

To start the VNA application with a minimized window

1. Right-click the Vector Network Analyzer shortcut icon on the desktop and open the

"Properties" dialog.

2. In the "Shortcut" tab, select "Run: Minimized".

Minimizing the VNA Application

Содержание ZND Series











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды