GUI Reference
R&S
®
ZNB/ZNBT
426
User Manual 1173.9163.02 ─ 38
5.7.7 Ground Loop Tab
Allows to specify a 1-port ground loop deembedding/embedding network.
Such a network is either defined
●
via its S-parameter stored in a one-port Touchstone file (
*.s1p
) or
●
by selecting a predefined lumped element model (Shunt L or Shunt C) and specify-
ing the available parameters (resistance/inductance or resistance/capacitance)
Use the complementary dock widget to activate or deactivate ground loop dembed-
ding/embedding for selected ports (see
Chapter 5.7.1.6, "Ground Loop Panel"
Background information
Refer to
Chapter 4.6.2.7, "Ground Loop De-/Embedding"
If the "Fixture Simulator" is disabled for the related channel (see
on page 346), this tab is inactive, i.e. all controls except the "Overview" button are
greyed out.
Overview
See
Type
Switches between "Deembedding" and "Embedding" network definition.
Network
The graphical list contains all available 1-port networks:
The symbol selects "no network" and disables ground loop de-/embedding.
The "1-Port Data" network is defined by means of imported S-parameter data; see
The remaining networks (Shunt L and Shunt C) are defined by lumped elements
whose parameters are displayed below the graphical list.
Offset Embed Softtool
