Administration
Restoring the System
83
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
Restoring the System
The following describes the steps to make a recovery of the
system disk.
Perform the following steps:
1.
If appropriate, disconnect all externally connected storage
devices from the system.
2.
Turn on the VENICE S. At the indicated moment during
start-up you have to press
[F11]
to enter the boot menu.
The boot menu is displayed on the screen.
3.
Select the internally installed USB flash drive as the boot
device.
4.
Press
[Enter]
.
The system will boot from the internal USB flash drive.
You will see a window on the screen where you can select
the Rohde & Schwarz Rescue environment for loading.
5.
Select RuS Rescue and press
[Enter]
.
Total Loss of Data
Selecting the wrong device for restoring the
system partition will lead to a total loss of data.
Do not execute any commands if you are not
sure about the correct target device.
To complete the loading of the Rohde & Schwarz Res-
cue environment some user entries are required. For
this follow the instructions given on the screen.
The loading of the environment and the process itself
will both try to initialize hardware that may not be pres-
ent on your system. Any error messages displayed
during loading/initialization, e.g.
Failed
or
Warning
,
can be disregarded. The backup/recovery process
should work nonetheless.
Содержание VENICE S
Страница 1: ...R S VENICE S User Manual 2906 1345 02 02 User Manual Broadcast and Media ...
Страница 6: ...6 VENICE S User Manual 2906 1345 02 02 Rohde Schwarz GmbH Co KG ...
Страница 12: ...Safety General Notes 12 VENICE S User Manual 2906 1345 02 02 Rohde Schwarz GmbH Co KG ...
Страница 108: ...Maintenance Replacing the Internal USB Memory Key 108 VENICE S User Manual 2906 1345 02 02 Rohde Schwarz GmbH Co KG ...