![Rohde & Schwarz TS-PSM4 Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/rohde-and-schwarz/ts-psm4/ts-psm4_user-manual_1478006036.webp)
Setting up
R&S
®
TS-PSM4
20
User Manual 1178.2796.02 ─ 01
6 Setting up
6.1 Channel wiring of the R&S TS-PSM4B (variant 02)
In contrast to the completely cabled R&S TS-PSM4 (variant 03) with mounted VPC
connector, the R&S TS-PSM4B (variant 02) is supplied without channel wiring and with
simple front plate. In this version the user can himself carry out the wiring of the chan-
nels that he needs. For this purpose suitable wires are run from the terminals of the
individual channels on the module’s base board via the module’s front plate openings
outward to a load or power source.
6.1.1 Position of the connecting terminals
shows the position of the connecting terminals on the base board.
Figure 6-1: Position of the connecting terminals on the base board
6.1.2 Mounting the terminal wires (high power channels)
)
In order to be able to connect a wire to terminals of low power or high power channels,
the terminal’s metal spring must first be pushed far enough, using a flat-head screw-
driver, to clear the opening that will take the wire. To do so the screwdriver must be
placed in the upper square opening of the terminal. The metal spring can be pressed
down by a light lever action and the screwdriver pushed into the terminal as far as it
will go.
Channel wiring of the R&S TS-PSM4B (variant 02)