Construction
R&S
®
TS-PSM3
14
User Manual 1178.2780.02 ─ 01
Figure 4-7: R&S TS-PRIO3 position of 3 A fuses
4.2.2 Connectors
Table 4-3: Connectors on the R&S TS-PRIO3
Abbreviation
Use
X1
Interface of channels 9 to 14 with the R&S TS-
PSM3.
X2
Interface of channels 15 and 16 with the R&S TS-
PSM3.
X12
Interface of low power channels 1 to 8 with the load
or voltage source.
X14
Interface of high power channels 9 to 16 with the
load or voltage source.
X20
Interface of channels 1 to 8 with the R&S TS-PSM3.
4.3 R&S TS-PK04
If the optional R&S TS-PK04 cable set has been installed in the R&S TS-PCA3 or R&S
TS-PWA3 chassis, the 30 A high current channels 9 to 14 and all 2 A channels of the
R&S TS-PSM3 on the rear of the chassis will be made accessible via the X3 and X4
connectors. For this purpose the R&S TS-PSM3 module must be installed in slots 15
and 16 in the chassis.
R&S TS-PK04
